EN 10025 Seamless Pipe Suppliers, BS EN 10025 2 Grade S355JR Material
EN 10025-2 Hot Rolled Structural Steels, EN 10025 Non Alloy Structural Steels Gr S355J2
BS EN 10025 1 Pipe
EN 10025 Steel Pipe
EN 10025 Seamless Pipe
Western Steel Agency is one of the large suppliers for high-quality BS EN 10025 Pipe. EN 10025-2 Hot rolled products of structural steels - 2: Technical delivery conditions for non-alloy structural steels - 2 of this document, in addition to Part 1 specifies the delivery condition for level and long products and semi-finished products. Hot rolled products of structural steel delivery condition for standardized/ normalized rolled weldable fine grain structural steel in addition to part 1, specifies a requirement for the flat and long product of hot-rolled weldable fine grain structural steel in the normalized/ normalized rolled delivery condition in the grades and qualities. EN 10025-4 Hot rolled weldable fine grain structural steels in the thermomechanical rolled condition in the grades and qualities in thickness L 120 mm for flat products and in thickness L 150 mm for long products. In addition to EN 10025-1, the steel specified below are specially intended for use in heavily loaded parts of welded structures such as flood gates, bridges, water supply tanks, storage tanks, etc for service at ambient and low temperatures.
The steels indicated are relevant to hot-rolled flat products with a minimum nominal thickness of 3 mm and a maximum nominal thickness ≤ 150 mm for grades S460, S500, S620, S550 and S690, a maximum nominal thickness of ≤ 100 mm for grade S890 and a maximum nominal thickness of ≤ 50 mm for grade S960 in steels which after quenching and tempering having a specified minimum yield strength of 460 MPa1 to 960 MPa1.